Machine guns introduction
Austria
 Steyr-Solothurn MG 30
 Steyr AUG /Hbar
Belgium
 FN Minimi
 FN MAG
 FN BRG-15
China, People's Republic
 Type 67 GPMG
 Type 88 GPMG
 Type 95 LMG
 Type 77 HMG
 Type 85 HMG
 W-85 HMG
 Type 89 HMG new
 Type 02 / QJG 02 HMG
Czech Republic
 ZB 26
 ZB 53 / Vz.37
 type 52 & 52/57
 type 58 (UK vz.58)
Denmark
 Madsen LMG
 Madsen-Saetter
Finland
 Valmet KvKK 62
France
 MAC M1924/29
 AAT Mod.52
Germany
 MG 08, MG 08/15, MG 08/18
 MG 13
 MG 34
 MG 42 and MG 3
 HK 21 and 23
 HK MG 4
Great Britain
 Vickers Mk.I
 Lewis
 Bren
 L86A1 SA-80 LSW
Israel
 Negev
Japan
 Type 96 & Type 99
 Type 62
Russia / USSR
 Maxim M1910/30
 Degtyarov DP DPM RP-46
 Degtyarov DS-39
 Degtyarov RPD
 Kalashnikov RPK
 Kalashnikov RPK-74
 Gorjunov SG-43 SGM
 Kalashnikov PK / PKM
 Pecheneg
 DShK DShKM 12.7
 NSV 12,7 'Utes'
 Kord 12,7
 KPV 14,5
Singapore
 STK Ultimax 100
 CIS .50 MG
South Africa
 Vector SS-77 / Mini-SS
South Korea
 Daewoo K3
Spain
 CETME Ameli
Switzerland
 Steyr-Solothurn MG 30
 SIG MG 50
 W+F MG 51
 SIG MG 710
USA
 Lewis
 Browning M1917 M1919
 Browning M1918 BAR
 Johnson M1941 M1944
 M60
 M16 LSW / LMG
 M134 Minigun new
 XM214 Microgun new
 Stoner 63
 M249 SAW
 M240
 Mk.48 mod.0
 Browning M2HB .50 cal
 XM312 .50 cal
 LW50MG new

 Gatling, Minigun, Vulcan

all texts and some pictures
copyright © 1999-2008
by Max R. Popenker
and can not be used without author permission

Contact E-Mail
ICQ:

SIG MG 710 machine gun (Switzerland)

SIG MG 710-2 (MG 57-2) machine gun in light role, on bipod and with 50-round belt container attached

SIG MG 710-2 (MG 57-2) machine gun in medium role, on tripod and with 200-round belt in separate box

SIG MG 710-3 in light role, early model with wooden buttstock

SIG MG 710-3 in light role, with belt box attached, late production model with metallic buttstock

Data for SIG MG 710-3 machine gun

Caliber	7,62x51 NATO
Weight	9,25 kg (with bipod) + 10 (tripod)
Length	1146 mm
Barrel length	560 mm
Feed	belt
Rate of fire	900 rounds per minute

In around 1955, following the successful testing of the prototype SIG assault rifle which used a retarded-blowback action, SIG engineers began development of a universal machine gun using the same principles. The basic design was derived from German MG 42V / MG 45 machine gun, but rollers were replaced by swinging flaps with rounded locking surfaces. The first SIG prototype, known as the MG 55, looked much like German MG 45, although the Swiss weapon was made to much higher standards. The MG 55 retained the MG 42 / MG 45-style barrel changing procedure, and in the following years SIG designers tried a variety of other barrel change systems, which, along with other minor changes, led to a series of prototypes, known as the MG 57-1, MG 57-2, and, eventually, SIG MG 710, which appeared in 1960. This gun was ready for production, and a few were made in 6.5x55 Swedish caliber for export; gun was also advertised in a number of other contemporary chamberings such as 7,92x57. Later on, SIG produced a similar weapon in 7.92x57, which was designated SIG MG 710-2, but this also was only made in very limited numbers. This one had different barrel change procedure and thus featured a shrt, tubular barrel jacket. In 1965 SIG presented the latest and most successful weapon of the MG 710 line – the SIG MG 710-3, chambered in 7.62x51 NATO ammunition only. It was somewhat different from previous weapons of the same series, as it featured a different barrel change system. This machine gun was sold in significant numbers to several South American and African countries. It must be noted that Swiss army never used SIG 710 machine guns, being entirely happy with 7,5x55 MG 51 machine guns.

The SIG MG 710 (also often referred to as the SIG model 710 or simply SIG 710) is an air-cooled, belt fed, retarded-blowback operated machine gun. The barrel is stationary but can be easily replaced through the opening in the right side of the relatively short barrel jacket. The barrel is fitted with a special handle on the right side which is used to remove hot barrels from the gun.
The locking system is based on the SIG Stgw.57 assault rifle, which, in turn, is an evolution of WW2-era German designs, either the Mauser Stg 45(M) or Grossfuss MG 45. The bolt group consists of two parts, a lighter head and a heavier body, with a pair of delaying levers inserted at either side at the front of the group. When in battery, the levers are engaged with cuts made in the barrel extension. Upon firing, gas pressure, via the base of the cartridge, pushes the bolt head back, and levers provide a mechanical disadvantage by accelerating the heavier bolt body. The system is so timed that the levers leave their recesses in barrel extension as soon as the bullet leaves the bore and pressure in barrel drops to safe levels. From this moment on, the bolt group is free to recoil under its accumulated inertia to complete the reloading cycle. To provide more reliable extraction, the chamber has several longitudinal flutes to allow some gas to "float" the case from the chamber walls.
The feed system uses non-disintegrating steel belts with open pockets. Feed is of the single-stage, push-through type, the belt being pulled from the left side only. The SIG MG 710 fires from an open bolt and the trigger unit permits automatic fire only.
In the light machine gun role the SIG MG 710 is used from an integral, folding bipod that is attached to the barrel jacket. In the medium role it can be used from a universal tripod, made by SIG. Early SIG MG 710-3 guns were fitted with wooden buttstocks; late production guns were made with tubular metallic butts.

--